Nowadays, with repeated epidemics, major manufacturers usually choose melt-blown cloth processing technology to produce melt-blown cloth. The key equipment of its machinery and equipment includes: automatic feeder, screw extruder, melt metering pump, rotary hydraulic press, rapid mesh filter device, melting Spraying equipment, spinning tube, spinning parts, netting machine, rewinding machine equipment, gas system software (hot air blower and electric heater), electret machinery, electronic control system, etc.

　　 extruder screw successive extruder effect is: melt the cut raw materials;

　　The effect of the melt metering pump is: metrological verification, control the output and the particle size of chemical fibers, and continue to evenly transfer the melt to the spinneret.

　　Melt metering pump

The effect of the 　　 screen changer is to filter out the residue in the melt to prevent clogging the spinneret hole.

　　 screen changer

　　Non-woven fabric production equipment material tube and spinneret steel plate parts: it is the key point of the melt blown production line equipment. The chemical fiber diameter of melt blown cloth ranges from 0.5 to 10 μm. During the entire process of spinning hole extrusion, the uniformity and reliability of the feed pipe has a fundamental effect on the raw materials of melt blown cloth. During the production process of the 1.6-meter large-format melt blown pipe, several 2500 diameters must be punched on the mold body. The relative density and uniform heat resistance have strict regulations, and the error of each diameter of about 0.3MM does not exceed 2%. ;The smoothness of the diameter is 0.01um-0.03um to achieve the level of mirror glass, and there must be no errors in parallelism.

　　The effect of the rewinding machine equipment is: the melt blown cloth is packaged in a tray.

　　The effect of the gas system software (hot air blower and electric heater) is to show the temperature and working pressure of the warm air commonly used in spinning cyclones.

　　Electret machinery and equipment: increase the positive charge storage capacity of non-anti-distribution electret, check more details

　　 Then the question is, if the traditional melt blown line manufacturer has already full of order information, and want to go to the melt blow line, how to choose the non-woven fabric production equipment manufacturer?

　　 He has made plastic granulation machinery and equipment (no machining), such as non-clothing machinery and equipment. Even if the melt-blown material pipe has not been made, other material pipes will be done nearby.

　　Secondly, are there many people in the machinery and equipment collective that have done meltblown non-woven fabric processing? This good mask machine manufacturer cannot adjust the machinery and equipment itself, but the master of the mask factory can adjust it all at once.

Just like the production and production of mask machines, after the traditional mask machine manufacturer’s order information cannot be received, the automation technology has just begun to increase the production of mask machines. Therefore, there will be many non-woven fabric production equipment companies increasing production and melting. Spray line of troops. Everyone should be careful to distinguish.

　　 After completing a survey, the vast majority of manufacturers that used to produce meltblown cloth are upgrading their machinery and equipment. In addition to the new projects, the recent machinery and equipment parts are very anxious. If you follow the above, carefully confirm the production line and the delivery date of important parts. The other thing is to understand the dealer’s business scale, past success stories, and order information. It’s not good if you force an order.